IPC-A-610
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
| Event Date | 15 Jan 2024 8:45 am |
| Event End Date | 17 Jan 2024 4:30 am |
| Cut Off Date | 07 Jan 2024 |
| Capacity | 10 |
| Individual Price | $2,950.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610 |
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
| Event Date | 15 Jan 2024 8:45 am |
| Event End Date | 17 Jan 2024 4:30 am |
| Cut Off Date | 08 Jan 2024 |
| Capacity | 10 |
| Individual Price | $1,150.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610 |
The Combined IPC-A-610 and IPC-A-620 Training and Certification course is conducted over five days and includes the following topics:
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
IPC-A-620 Training and Certification Course Topics:
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: - Stamped and formed contacts - Machined contacts
- Insulation displacement connections
- Ultrasonic welding
- Soldered terminations
- Splices
- Connectorisation
- Moulding and potting
- Marking and labelling
- Co-axial and twin-axial assembly
- Wire bundle securing
- Shielding
- Installation
- Testing of Cable/Wire Harness Assemblies
| Event Date | 22 Apr 2024 8:45 am |
| Event End Date | 26 Apr 2024 4:00 pm |
| Cut Off Date | 15 Apr 2024 |
| Capacity | 10 |
| Individual Price | $2,205.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610, IPC/WHMA-A-620 |
The Combined IPC-A-610 and IPC-A-620 Training and Certification course is conducted over five days and includes the following topics:
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
IPC-A-620 Training and Certification Course Topics:
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: - Stamped and formed contacts - Machined contacts
- Insulation displacement connections
- Ultrasonic welding
- Soldered terminations
- Splices
- Connectorisation
- Moulding and potting
- Marking and labelling
- Co-axial and twin-axial assembly
- Wire bundle securing
- Shielding
- Installation
- Testing of Cable/Wire Harness Assemblies
| Event Date | 13 May 2024 8:45 am |
| Event End Date | 17 May 2024 4:00 pm |
| Cut Off Date | 10 May 2024 |
| Capacity | 2 |
| Individual Price | $2,720.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610, IPC/WHMA-A-620 |
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
| Event Date | 29 Jul 2024 8:45 am |
| Event End Date | 31 Jul 2024 4:30 pm |
| Cut Off Date | 26 Jul 2024 |
| Capacity | 8 |
| Individual Price | $3,770.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610 |
IPC-A-610, Acceptability of Electronic Assemblies, is the most widely used specification published by IPC with an international reputation as THE source for end-product acceptance criteria in both consumer and high-reliability electronic assemblies. A comprehensive and technical program, this certification will improve candidates’ accuracy of ‘discrimination’ between an ‘acceptable’ and ‘non-conforming’ electronic assembly per the IPC-A-610 standard, leading to continuous improvement in product quality and reliability.
| Event Date | 29 Jul 2024 8:45 am |
| Event End Date | 31 Jul 2024 4:30 pm |
| Cut Off Date | 26 Jul 2024 |
| Capacity | 8 |
| Individual Price | $1,600.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610 |
The Combined IPC-A-610 and IPC-A-620 Training and Certification course is conducted over five days and includes the following topics:
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
IPC-A-620 Training and Certification Course Topics:
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: - Stamped and formed contacts - Machined contacts
- Insulation displacement connections
- Ultrasonic welding
- Soldered terminations
- Splices
- Connectorisation
- Moulding and potting
- Marking and labelling
- Co-axial and twin-axial assembly
- Wire bundle securing
- Shielding
- Installation
- Testing of Cable/Wire Harness Assemblies
| Event Date | 26 Aug 2024 8:45 am |
| Event End Date | 30 Aug 2024 4:30 pm |
| Cut Off Date | 14 Aug 2024 |
| Capacity | 10 |
| Individual Price | $2,720.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610, IPC/WHMA-A-620 |
The Combined IPC-A-610 and IPC-A-620 Training and Certification course is conducted over five days and includes the following topics:
IPC-A-610 Certified IPC Trainer Course Topics:
- Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered requirements for connecting to terminals
- Soldered connection requirements for plated-through holes
- Surface mounting criteria for chip components, leadless and leaded chip carriers
- Swaged hardware, and heatsink requirements of mechanical assemblies
- Component mounting criteria for DIPS, socket pins, and card edge connectors
- Jumper wire assembly requirements
- Solder fillet dimensional criteria for all major SMT component groups
- Soldering anomalies such as tombstoning, dewetting, voiding, etc
- Criteria for component damage, laminate conditions, cleaning and coating
- Steps to effectively using the lesson plan and materials, tips on inspection and a review of important Certified IPC Trainer skills
IPC-A-620 Training and Certification Course Topics:
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: - Stamped and formed contacts - Machined contacts
- Insulation displacement connections
- Ultrasonic welding
- Soldered terminations
- Splices
- Connectorisation
- Moulding and potting
- Marking and labelling
- Co-axial and twin-axial assembly
- Wire bundle securing
- Shielding
- Installation
- Testing of Cable/Wire Harness Assemblies
| Event Date | 14 Oct 2024 8:45 am |
| Event End Date | 18 Oct 2024 4:30 pm |
| Cut Off Date | 11 Oct 2024 |
| Capacity | 10 |
| Individual Price | $2,720.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610, IPC/WHMA-A-620 |
IPC Training and Publications
The SMCBA is a Licenced IPC Training Centre for the IPC programs -
J-STD-001, IPC-A-610, IPC/WHMA-A-620, IPC-7711/21
