IPC WHMA A 620
*THIS RECERTIFICATION COURSE IS INTENDED FOR INDIVIDUALS WITH A CURRENT CERTIFICATION*
IPC-A-610, Acceptability of Electronic Assemblies, is the most widely used specification published by IPC with an international reputation as THE source for end-product acceptance criteria in both consumer and high-reliability electronic assemblies. A comprehensive and technical program, this certification will improve candidates’ accuracy of ‘discrimination’ between an ‘acceptable’ and ‘non-conforming’ electronic assembly per the IPC-A-610 standard, leading to continuous improvement in product quality and reliability.
IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, is the first industry consensus standard for cable and wire harness fabrication and installation, developed with the support of the Wire Harness Manufacturers Association (WHMA). Classes of products are defined and include criteria for Acceptable, Process Indicator and Defect conditions to support the collection of visual quality acceptability requirements for each class.
| Event Date | 07 Apr 2025 8:45 am |
| Event End Date | 10 Apr 2025 4:30 pm |
| Cut Off Date | 02 Apr 2025 |
| Capacity | 8 |
| Individual Price | $2,080.00 |
| Location | Training Centre Adelaide |
| Categories | IPC-A-610, IPC/WHMA-A-620 |
IPC/WHMA-A-620, Requirements and Acceptance for Cable and Wire Harness Assemblies, is the first industry consensus standard for cable and wire harness fabrication and installation, developed with the support of the Wire Harness Manufacturers Association (WHMA). Classes of products are defined and include criteria for Acceptable, Process Indicator and Defect conditions to support the collection of visual quality acceptability requirements for each class.
| Event Date | 14 Apr 2025 8:45 am |
| Event End Date | 16 Apr 2025 4:30 pm |
| Cut Off Date | 07 Apr 2025 |
| Capacity | 8 |
| Individual Price | $1,670.00 |
| Location | Training Centre Adelaide |
| Categories | IPC/WHMA-A-620 |
IPC/WHMA-A-620 Training course Information
The IPC-A-620 Training and Certification course is conducted over three days and includes the following topics:
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: - Stamped and formed contacts - Machined contacts
- Insulation displacement connections
- Ultrasonic welding
- Soldered terminations
- Splices
- Connectorisation
- Moulding and potting
- Marking and labelling
- Co-axial and twin-axial assembly
- Wire bundle securing
- Shielding
- Installation
- Testing of Cable/Wire Harness Assemblies
IPC Training and Publications
The SMCBA is a Licenced IPC Training Centre for the IPC programs -
J-STD-001, IPC-A-610, IPC/WHMA-A-620, IPC-7711/21
